Filtran

CEP-5710 Common Mode Inductor

CES5710 is a 4-winding common mode inductor. It is specifically designed to suppress EMI on the 4-wire S-Bus in the ISDN system.

The windings are extremely well balanced in order to provide the required Longitudinal Balance laid down in CCITT I.430.

Features: 
  • Meets CCITT I.430
  • Suppresses EMI on the 4-wire S-Bus in the ISDN system

TEW-5694 Output Transformer

TEW5694 is designed and approved to be used, as a transmit transformer in CEPT applications with the following devices:

  • STC TEL5219L

Complies with CCITT G.703 and I.431, with regards to Longitudinal Balance, Pulse Mask and Impedance

Features: 
  • Primary rate ISDN network nodes
  • PBX or computer to T1/CEPT Digital Trunks.
  • TDM Multiplexers

TEW-5660 Series Input/Output Transformer

TEW5660 is a surface mount transformer, designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface.

TEW5660 complies with the requirements of CCITT I.430.

It has been designed and approved for the following devices:

TEW5660

  • AMD 79C30A
  • Mitel MT8930A,- B, - C,  MT8931B, - C
  • National TP3420
  • Siemens PEB2080,  PEB2081,  PEB2085  PEB2086
  • Cologne HFC-SP

TEW5660-1

  • Intel 29C53

TEW5660-2

  • Motorola MC145474,  MC145475
Features: 
  • Complies with ISDN S-Bus Interface
  • Meets the requirements of CCITT I.430

TPW-5640 Input/Output Transformer

TPW5640 is designed to interface with the subscribers premises (NT) and the 2-wire line side of the Central Office Equipment (LT) in the ISDN.

TPW5640 meets the electrical specifications for the Motorola MC145472 device.

TPW5640 conforms to the requirements of the ANSI T1.601-1988.

Features: 
  • Meets the electrical specifications for the Motorola MC145472
  • Meets the requirements of the ANSI T1.601-1988

TPW-5624 Input/Output Transfomer

TPW5524 is designed to interface with the subscribers premises (NT) and the 2-wire line side of the Central Office Equipment (LT) in the ISDN.

TPW5624 meets the electrical specifications for the Motorola MC145572 device.

TPW5624 conforms to the requirements of the ANSI T1.601- 1988.

Features: 
  • Meets ANSI T1.601- 1988 requirements
  • Meets the electrical specifications for the Motorola MC145572

CES-5622 Common Mode Inductor

CES5622 is a surface mount 4-winding common mode inductor. It is specifically designed to suppress EMI on the 4-wire S-Bus
in the ISDN system.

The windings are extremely well balanced in order to provide the required Longitudinal Balance laid down in CCITT I.430.

Features: 
  • 4-winding
  • Meets required Longitudinal Balance

TEW-5615 Output Transformer

TEW5515 is designed and approved to be used, as a transmit transformer in CEPT applications, 75 W coaxial line, with the following devices:

  • STC TEL5219L

Complies with CCITT G.703 and I.431 with regards to Longitudinal Balance, Pulse Mask and Impedance.

Features: 
  • Primary rate ISDN network nodes
  • PBX or computer to T1/CEPT Digital Trunks
  • TDM Multiplexers

TEW-5614 Input Transformer

TEW5514 is designed and approved to be used as a receive transformer in CEPT applications, 75 W coaxial line, with the following devices:

  • STC TEL5219L

Longitudinal Bal.

  • Exceeds the requirements of CCITT I.431.

Return Loss:

  • Exceeds the requirements of CCITT G.703 and BS6328.
Features: 
  • Primary rate ISDN network nodes
  • PBX or computer to CEPT Digital Trunks
  • TDM Multiplexers

TEW-5613 Transmit Transformer

TEW5613 is specifically designed to be used as a Transmit transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.

Features: 
  • Very low Leakage Inductance
  • Excellent balance

TEP-5606 Series DC/DC Converter Transformer

TEP5606 is designed and approved to be used as a power supply transformer with the Siliconix SI 9105 device.

TEP5606 meets the CCITT I.430 requirements with reference to various modes of operation.

Features: 
  • Compact size
  • Efficient
  • Reinforced insulation (TEP5606-1) in accordance with IEC950, EN60950
Syndicate content