Systems, Subsystems & Solutions

TPW-5624 Input/Output Transfomer

TPW5524 is designed to interface with the subscribers premises (NT) and the 2-wire line side of the Central Office Equipment (LT) in the ISDN.

TPW5624 meets the electrical specifications for the Motorola MC145572 device.

TPW5624 conforms to the requirements of the ANSI T1.601- 1988.

Features: 
  • Meets ANSI T1.601- 1988 requirements
  • Meets the electrical specifications for the Motorola MC145572

CES-5622 Common Mode Inductor

CES5622 is a surface mount 4-winding common mode inductor. It is specifically designed to suppress EMI on the 4-wire S-Bus
in the ISDN system.

The windings are extremely well balanced in order to provide the required Longitudinal Balance laid down in CCITT I.430.

Features: 
  • 4-winding
  • Meets required Longitudinal Balance

TEW-5615 Output Transformer

TEW5515 is designed and approved to be used, as a transmit transformer in CEPT applications, 75 W coaxial line, with the following devices:

  • STC TEL5219L

Complies with CCITT G.703 and I.431 with regards to Longitudinal Balance, Pulse Mask and Impedance.

Features: 
  • Primary rate ISDN network nodes
  • PBX or computer to T1/CEPT Digital Trunks
  • TDM Multiplexers

TEW-5614 Input Transformer

TEW5514 is designed and approved to be used as a receive transformer in CEPT applications, 75 W coaxial line, with the following devices:

  • STC TEL5219L

Longitudinal Bal.

  • Exceeds the requirements of CCITT I.431.

Return Loss:

  • Exceeds the requirements of CCITT G.703 and BS6328.
Features: 
  • Primary rate ISDN network nodes
  • PBX or computer to CEPT Digital Trunks
  • TDM Multiplexers

TEW-5613 Transmit Transformer

TEW5613 is specifically designed to be used as a Transmit transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.

Features: 
  • Very low Leakage Inductance
  • Excellent balance

TEP-5606 Series DC/DC Converter Transformer

TEP5606 is designed and approved to be used as a power supply transformer with the Siliconix SI 9105 device.

TEP5606 meets the CCITT I.430 requirements with reference to various modes of operation.

Features: 
  • Compact size
  • Efficient
  • Reinforced insulation (TEP5606-1) in accordance with IEC950, EN60950

TEW-5564 Isolation/Bridging Transformer

TEW5364 is specifically designed to be used as an isolation/bridging transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.

A shield is provided to improve the balance.

Features: 
  • Shield between windings
  • Very low Leakage Inductance
  • Excellent balance

Spectrum Microwave Wideband, Switchable, Phase Matched Amplifiers (2000-8000 MHz) Now Available

Spectrum Microwave Wideband Switchable AmplifierORLANDO, FL - October 18, 2011 - API Technologies Corp.’s (NASDAQ: ATNY) Spectrum Microwave product line now offers a compact solution to system signal distribution issues with this new phase matched, switchable, multi-channel amplifier design. The Model BXMF1020 allows an engineer to distribute an amplified signal to multiple ports and measure the amplified output from up to 4 additional ports. The Model BXMP1020 is both phased and amplitude matched, providing 10 to 20 dB of gain and over 60 dB of channel to channel isolation.

Firewall Connectors Now Available from API Technologies’ Spectrum Control Product Line

ORLANDO, FL and WASHINGTON DC (AUSA: Booth #3654) — October 12, 2011 — API Technologies Corp. (NASDAQ:ATNY) (“API” or the “Company”), a provider of electronic systems, subsystems, RF, and secure systems for defense, aerospace, and commercial applications, announced today the availability of Firewall Connectors from its Spectrum Control line of military circular connectors. Firewall connectors are highly reliable and designed to prevent fire or spark from penetrating through a sealed bulkhead. Experts will be on hand to discuss all of API’s products and services, including Firewall Connectors, at AUSA Booth #3654.

Next Generation Rugged AC Power Distribution Unit Available Now from API Technologies


Spectrum Power AC SmartStart PDU, 16 PortORLANDO, FL and WASHINGTON DC (AUSA: Booth #3654) — October 11, 2011 — API Technologies Corp. (NASDAQ:ATNY) (“API” or the “Company”), a provider of electronic systems, subsystems, RF, and secure systems for defense, aerospace, and commercial applications, announced today that it is now shipping its second generation, 16-port, AC Switched Power Distribution Unit (PDU). The Spectrum AC SMARTStart® Gen II – Military is hardened to meet extreme temperatures, mechanical shock and vibration, and other harsh elements, while continuing to provide reliable power. The 16-port version is the latest edition to the Spectrum Power AC SMARTStart PDU product family. Experts will be on hand to discuss all of API’s products and services, including the AC SMARTStart, at AUSA Booth #3654.

Syndicate content

Recent Events

June 19, 2017 - June 21, 2017
Street:
Baltimore Convention Center & Hilton Hotel
City:
Baltimore
,
Province:
Maryland
Country:
United States
The Information Assurance Symposium (IAS) will take place from 19th June to the 21st June 2017 at the Baltimore Convention Center & Hilton Hotel. IAS is the premier NSA information assurance event, providing an opportunity for guests to learn and network from cyber security professionals, subject matter experts and solution providers from throughout Government, industry and academia.
June 4, 2017 (All day) - June 9, 2017 (All day)
City:
Honolulu
,
Province:
Hawaii
Country:
United States
The IEEE MTT International Microwave Symposium (IMS) is the premier annual international meeting for technologists involved in all aspects of microwave theory and practice. It consists of a full week of events, including technical paper presentations, workshops, and tutorials, as well as numerous social events and networking opportunities. The symposium also hosts a large commercial exhibition. Co-located with IMS are the IEEE RFIC and ARFTG conferences.