Home | | | | | Spec Mini-Press Filters

Spec Mini-Press EMI Filters

Low Pass Filters

The Spec Mini-Press 9925 Series are knurled EMI filters designed to be pressed into place and create a reliable mechanical bond. This feature makes it an excellent selection for applications where soldering is undesirable. Spec Mini-Press filters perform well in high impedance circuits where large capacitance values are not practical. Suitable plating is available that allows gold bonding to the terminals.

  • Attenuators
  • Synthesizers
  • Oscillators
  • .136" to .137" (3.45-3.48mm) diameter hole
  • Hole must be free of all insulating materials
  • Installation tool must have a hole of sufficient depth and diameter to accept the terminal of the filter
  • Installation force must be applied gradually and smoothly until the flange of the filter is seated against the receiving part (request installation instructions)
 
Installation Press-in
Plating Gold
Seal Glass sealed on one end, resin sealed on the other end
Termination Options Plating suitable for gold bonding
Operating Temperature -55°C to +125°C
Part Number Rated Voltage
125°C
I Amp Min Cap Minimum Insertion Loss (dB)
1
MHz
10
MHz
30
MHz
100
MHz
300
MHz
1
GHz
10
GHz
DC
SCI-9925-153 50 5 0.015 µF +100%/-0% 7 25 30 40 40 60 60
SCI-9925-303 50 5 0.030 µF +100%/-0% 10 30 35 45 50 55 55
SCI-9925-502 100 5 5000 pF +100%/-0% - 15 20 30 35 45 55
SCI-9925-000 200 5 10 pF max. - - - - - 10 10
SCI-9925-101 200 5 100 pF +100%/-0% - - - 3 10 20 28
SCI-9925-501 200 5 500 pF +100%/-0% - - - 15 22 35 40
SCI-9925-122 200 5 1200 pF +100%/-0% - 5 10 20 28 35 45